Signgeer - Super Tools for Sign Heroes - Edition 22 - Catalog - Page 92
DISPLAY
ORDER ONLINE SIGNGEER.COM
euro cheiftain banner bracket system
The Euro Chieftain system complies fully with the all-important
Government Regulation EN40, which dictates the maximum wind
load that any type of signage is allowed to exert onto a standard
street lighting column. This is often a general requirement for local
authority and county council tenders.
• Suitable for lamp post columns and posts from 76mm diameter
upwards, whether straight, fluted or tapered
• Estimated installation time approx. 20 minutes per banner
What do I need for a complete system?
EN40 Compliant
Product Code
Description
ecbracket
euro cheiftain BRACKET set
The system alone comprises of two black fibreglass arms, two black
powder-coated aluminium brackets with integrated spring-loaded
tensioning and banner arm flexing mechanisms, two metal clips to
secure the poles to the brackets as shown in the image and two pieces
of neoprene sheet which sit between the bracket housing and pole.
price
To complete the system, Tamtorque clips need to be added to suit the
size post required (3 Tamtorque Stainless Steel bands per bracket; 6
per set). These provide a tamper-proof fix.
120.00
Most common banner sizes recommended:
• 2000mm (L) x 600/750/800mm (W) and 2200mm (L) x 600/750/800mm (W)
• Maximum banner size accommodated: 3000mm x 800mm (only for short
term or a very low-wind area)
Features:
• Full compliance with the EN40 Government Regulation that dictates all
lighting columns must be capable of facilitating the wind loading that a single
0.3 square metre rigid road sign would exert
• Wind tunnel tested up to 90mph; results available in PDF format in the
downloads section online illustrating compliance with EN40
• Suitable for installing onto lamp columns and flag poles from 76mm diameter
and above using the correct corresponding clips
• Compatible with straight, fluted or tapered columns
• Arms can be cut down to match any banner width required up to 800mm
wide
• Can be used for one or two banners per column
• Arms easily removed in-between banner campaigns leaving brackets and
banding in place on the column
• Can be wall mounted using pre-drilled holes within bracket
• Full 5 year product warranty (more details in warranty statement available on
our website)
90
